asperities

英 [æsˈpɛrɪtiz]

美 [əˈspɛrɪtiz]

n.  (尤指语言、态度)粗暴，严厉
asperity的复数

双语例句

• However, at higher angle of tooth-shaped asperities and under higher normal stress, the failure model II is found, which is in first tension but final shear failure.
  在较高的法向应力下，含起伏角较高齿形节理面的非贯通节理岩体可能出现破坏模式II（先张拉后剪切破坏模式）。
• The highest temperature of asperities is much higher than that of worn plane, which is one of the main factors in leading to stress graphitization on worn surface.
  摩擦过程中粗糙表面微凸体的最高温度远大于摩擦平面，瞬时的高温和摩擦剪切力的作用使微凸体被应力石墨化。
• Based on the number of asperities on the fault plane, the asperity model was classified into three models: all-asperity, single-asperity and multi-asperity models.
  根据凹凸体的数量将凹凸体模型分为三种模型：所有凹凸体，单凹凸体和多凹凸体。
• Numerical results reveal that the existence of single asperities can lead pressure to change drastically and film thickness to become thin in the vicinity of the asperities.
  结果表明，单粗糙峰造成接触区对应位置油膜压力剧烈变化而膜厚变薄。
• Effects of barriers and asperities on seismic moment
  障碍体和凹凸体对地震矩的影响
• If the gouge layer is thin, contact between asperities on the rock surfaces can occur.
  如果充填物层很薄，两个岩石表面上的凸起物就有可能互相接触。
• The larger the surface roughness and the sharper the asperities, the greater the asperity contact load.
  表面越粗糙、表面凸峰越尖锐，微峰接触载荷则越大。
• The influence of density distribution and height of the asperities on nonlocal friction is also studied here. A experimental system for friction test is designed.
  分析了微凸体分布密度不同、微凸体高度不同时，非局部摩擦的影响变化规律。
• Based on the interaction of asperities and upper-bound approach a mathematical model for simulation of friction phenomenon between dies and workpiece was proposed.
  本文中以刚性微凸体与可变形微凸体的相互作用模拟金属压力加工过程中模具与工件之间的摩擦过程，并用上限法分析所提出的模型。
• Propagation of an aseismic dislocation through asperities with smooth borders
  穿过具有平滑边界凹凸体的无震位错的传播