resultants

英 [rɪˈzʌltənts]

美 [riˈzʌltənts]

网络  结式; 合力

双语例句

• This effect can be explained as the resultants of the electrostriction of PU and polarization reversal of the PZT at high field.
  PU的电致伸缩特性与PZT在高电场下极化反转效应结合，导致了PZT/PU复合物这种有趣的性能。
• In this paper a method has been advanced by means of which it has been proven that the cancelation of the resultants of both forces and their moment is the sufficient condition of the equilibrium of rigid body.
  本文给出了一种方法，证明了合力及合力矩为零是刚体平衡的充分条件。
• The causations of higher content of ethyl acetate in the fermentation resultants were analyzed and relative technical measures were adopted to reduce the content of ethyl acetate: 1. optimizing the proportioning of raw materials and increasing the starter-making temperature;
  找出了发酵产物中乙酸乙酯偏高的原因，并制定了降低乙酸乙酯的工艺措施：（1）优选原料配比，提高制曲温度；
• Effects of the rare earth metal added into the steel as the modifying agent, its resultants and the optimal amount of the rare earth to be added are expounded;
  阐述了稀土金属作为变性剂在钢中的作用，其生成物及稀土金属的最佳加入量问题。
• Simultaneity, effects of different inlet air velocity 、 temperature and quality ratio of CH4/ O2 on reactants and resultants in chemical looping fluidized bed has been investigated.
  同时，研究了不同进口气体速度、温度和CH4/O2的配比对化学链流化床内反应物与生成物的影响。
• The reaction processes were traced by GC and the causes of different resultants were explored.
  采用气相色谱跟踪了反应过程，解释了产物因结构而异的原因。
• The theory and test results demonstrated that the improvement of the early compressive strength of the paste depends on the hydration rate of mineral admixtures and amount of the hydration resultants.
  理论和试验结果分析表明，掺合料取代水泥时，浆体早期抗压强度的提高取决于掺合料自身参与水化反应的速度和水化产物的数量。
• Numerical examples are given at the end of this paper which indicate satisfactory results of stress resultants and displacements can be obtained by the present method.
  文末给出算例，算例表明无论内力和位移均可得到满意的结果。
• The structure stability and the electrical conductivity stability of the resultants under different circumstances and conditions were investigated.
  此外还考察了产物在不同环境和条件下的结构稳定性和电导稳定性。
• Proposed considered resultants to the inappropriate tooth including the manufacture error, crudely services the error, the structure distortion and so on various single factor function and time the multi-factors union function automobile door lock system reliability analysis method.
  提出了考虑到不恰当的齿合量包括制造误差，粗暴维修误差，结构变形等各单因素作用及多因素结合作用时的汽车门锁系统可靠性分析方法。