shafts

英 [ʃɑːfts]

美 [ʃæfts]

n.  (电梯的)升降机井; 通风井; 竖井; 井筒; (箭、高尔夫球杆等的)杆; (锤等的)柄; (机器的)轴
v.  亏待; 苛待; 欺骗
shaft的第三人称单数和复数

柯林斯词典

• N-COUNT (电梯等的)升降机井，竖井，井筒，通风井
  Ashaftis a long vertical passage, for example for a lift.
  1. He was found dead at the bottom of a lift shaft.
     他被发现死在了电梯井的底部。
  2. ...old mine shafts.
     老式矿井
• N-COUNT (机械的)轴，传动轴
  In a machine, ashaftis a rod that turns round continually in order to transfer movement in the machine.
  1. ...a drive shaft.
     驱动轴
  2. ...the propeller shaft.
     螺旋桨的传动轴
• N-COUNT (矛、高尔夫球棒等的)杆;(斧头等的)柄
  Ashaftis a long thin piece of wood or metal that forms part of a spear, axe, golf club, or other object.
  1. ...golf clubs with steel shafts.
     带钢杆的高尔夫球棒
• N-COUNT (光线、阳光等的)一束，一道
  Ashaft oflight is a beam of light, for example sunlight shining through an opening.
  1. A brilliant shaft of sunlight burst through the doorway.
     一束耀眼的阳光从门口照射进来。

双语例句

• Shafts are mounted in bearings and transmit power through such devices as gears, pulleys, cams and clutches.
  轴安装在轴承中，通过齿轮、皮带轮、凸轮和离合器等零件传递动力。
• Remove both drive shafts on transmission side and tie them up.
  拆下变速器侧的两个驱动轴并将它们绑紧。
• Coupling that connects two rotating shafts allowing freedom of movement in all directions.
  连接两个转轴可以在任何方向自由移动的耦合。
• Transverse bracing was installed between the two shafts. Minute vertical and lateral adjuster is built in the nozzle.
  喷嘴安装横向和纵向的为调节装置。
• A new kind of NC system for machining shafts with non-circular cross-section is proposed in this paper.
  提出了一种新型的非圆轴数控加工系统，用于横截面为非圆形状的轴类零件加工。
• Parallel shafts, however, can also be connected by gears of another type, and a spur gear can be mated with a gear of a different type.
  平行槽，不过，也可以连接齿轮的另一种类型，和一个正齿轮可以交配与齿轮的一种不同类型。
• A method for aligning the shafts of a turbo-generator set is introduced.
  本文对汽轮发电机组安装、检修过程中的轴系对中及调整方法进行了研究。
• The main rotary shaft can be simultaneously fixed with a plurality of circular discs with self rotation shafts.
  主转轴上可同时固定多个带自转轴的圆盘。
• The planet gear shafts and the axis holes of the planet gears are connected under an interference fit.
  行星齿轮轴与行星齿轮的轴孔之间为过盈配合。
• First, the complex gears and shafts coupling vibration equations was built based the transmitting structure.
  首先建立了传动系统的动力学模型，进行了动载分析；