N头条>英语词典>short-circuiting翻译和用法

short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路,走捷径
short-circuit的现在分词

柯林斯词典

  • V-ERG (使)短路
    If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
    1. Carbon dust and oil build up in large motors and cause them to short-circuit...
      碳尘和燃油在大发动机里越积越多,造成了发动机短路。
    2. Once inside they short-circuited the electronic security.
      一旦置入,它们就会使电子安全设施短路。
    3. Short-circuitis also a noun.
    4. The fire was started by an electrical short-circuit.
      火灾是由电线短路引发的。
  • VERB 回避,绕过(某一流程或程序)
    If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
    1. The approach was intended to short-circuit normal complaints procedures.
      这种方法旨在避开正常的投诉程序。

双语例句

  • Randomicity& stability of short-circuiting droplet transfer in arc welding process
    弧焊短路过渡过程的随机性与稳定性
  • Analysis of synchronous multi-information and experimental research of short-circuiting transfer process in CO 2 arc welding
    CO2焊短路过渡过程的同步多信息分析及试验
  • The rule of the arc-time and short-circuiting transfer cycle time under the high speed welding was researched by welding quality analyzer of Hannover.
    采用汉诺威焊接质量分析仪,研究了在高速焊接的情况下,燃弧时间与短路过渡周期的变化规律。
  • Adaptive control system with constant frequency of droplet transfer for waveform controlled short-circuiting co_2 arc welding
    波控短路过渡CO2焊接恒频自适应控制系统
  • In order to take into account the synthetic influence of all characteristic parameters, by means of the characteristic parameters synthetic value, a quantitative evaluation function is built up to describe and real time evaluate the short-circuiting transfer process of CO2 arc welding.
    为综合考虑这些参数的影响,以特征参数综合值来描述和实时评判CO2焊接短路过渡过程,得到一个能全面定量描述和评判CO2焊接过程的综合评价函数。
  • The effects of the short-circuiting transfer parameters on weld formation quality in high speed CO2 welding process were analyzed.
    分析了高速CO2焊接过程中短路过渡参数对焊缝成形质量的影响。
  • The electrical field radiated by the unit current in a rectangular waveguide with a short-circuiting plunger is derived by making use of the auxiliary potential function.
    应用辅助势函数,推导了一端具有短路板的矩形直波导中单位电流源的辐射场。
  • According to the analysis we can get the result of the welding quality from the current and voltage of the CO_2 gas shield droplet short-circuiting transfer.
    在此基础上,采用本系统对熔滴短路过渡CO2气体保护焊的焊接电流和电压波形进行了实时采集、存储。
  • Otherwise, accidental short-circuiting can lead to electric shock and to serious damage.
    否则,意外的短路可能引起触电和严重的损坏。
  • Some pharmaceutical companies are experimenting with other types of additives with the aim of short-circuiting bacteria's defenses.
    一些制药公司也在试验其它类型的添加剂,旨在破坏细菌的防御体系。