shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- When the magnesium alloys are welded by TIG or MIG, the metal in the seam will be oxidized acutely. Some defects such as cracks, voids and shrinkages appear.
当镁合金采用钨极氩弧焊、熔化极气体保护焊等焊接方法时,焊缝金属会剧烈氧化,产生气孔、裂纹等缺陷。 - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段:浇注后,铁水随温度的下降,发生液态收缩; - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究,并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - The shrinkages of the different composition zinc matrix alloys were measured by the self made linear shrinkage measurer.
对模具用不同配比的锌基合金进行了收缩率的测定。 - Abstract: introduced is the experience in replacing atmosperic riser with thermal-isolation riser and improving pouring system to eliminate shrinkages.
文摘:介绍了用保温冒口代替大气压力冒口,改进浇注系统解决铸件缩孔问题的经验。 - Variation in Densities and Shrinkages of Chinese Fir Wood From Plantation
杉木人工林木材密度及干缩性变异规律 - The shrinkages in water and dry of the complex polymer fibers are tested through a great deal of experiments. The shrinkage behaviours of the composite PBT/ PET fibers are analysed by means of linear regression method.
通过大量试验研究了复合聚酯纤维的沸水和干热收缩规律,并利用线性回归方法讨论了热收缩速率的变化规律。 - The shrinkages of green bodies in X, Y, Z directions were measured. The results show that under the same pressure, there is no difference of shrinkage in X and Y directions, and does not change with the height.
结果表明,同一压力下,坯体X向和Y向收缩率一致,并且不同高度处的X、Y向收缩率无明显差异。 - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良,弯曲强度达到710MPa,断裂韧性达到4.77MPa·m1/2。在完全烧结过程中,各个方向收缩均匀一致。 - Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法