spatters
英 [ˈspætəz]
美 [ˈspætərz]
v. 溅; 洒; 洒落; 滴滴答答地落下
spatter的第三人称单数
柯林斯词典
- V-ERG 溅;洒
If a liquidspattersa surface or youspattera liquid over a surface, drops of the liquid fall on an area of the surface.- He stared at the rain spattering on the glass...
他凝视着雨点溅落在玻璃上。 - Gently turn the fish, being careful not to spatter any hot butter on yourself...
轻轻地把鱼翻过来，小心别把滚烫的黄油溅到自己身上。 - Blood spattered the dark concrete...
鲜血溅落在黑色的水泥地上。 - I always spatter my blouse with gravy when I eat...
吃饭的时候，我总是把肉汁溅到衬衣上。 - Her dress was spattered with mud.
她的裙子溅上了泥浆。
- He stared at the rain spattering on the glass...
双语例句
- Carbon dioxide welding is a welding method with low cost and high efficiency, and it widely used in the actual production. But it also has the disadvantages of big spatters and bad formation of weld in carbon dioxide welding.
二氧化碳气体保护焊作为一种低成本、高效率的熔焊方法，在实际生产中被广泛应用，但是短路过渡二氧化碳焊存在飞溅大，成形较差的缺点。 - The corrosion rate of the ceramic-lined pipes due to the metallic particles and spatters on the pipe walls decreases at the beginning of test and reaches a certain constant with time elapsed.
其内壁的金属颗粒和飞溅造成腐蚀率在实验的开始阶段逐渐减小，但随着时间的增加，趋向一个定值； - If you must heat something that spills or spatters all over the walls, clean up after your lunch explosion.
如果一定要加热那些会溢出来、或溅得满墙都是的食物，请在午餐“爆炸”之后收拾好残局。 - Wide welding current and voltage matching range, easy to adjust, less spatters.
整机电流电压配合范围宽，容易调节，飞溅小。 - At the same time, the parameters for drilling-and-blasting of cut and the safety measures for prevent of flying rocks and spatters were introduced.
同时，介绍了切口的钻孔爆破参数以及防飞石和飞溅物的措施。 - A activated co2-gas shielding arc welding experiment system is built and arc behavior, material transfer, welding spatters, welding beam are studied.
建立了一套活性CO2气体保护焊焊接试验系统，并对其电弧行为、熔滴过渡、焊接飞溅、焊缝成型进行了实验研究。 - The sum, average and proportion based on different threshold of new spatters in different welding regions were calculated to study the variation rule of the characteristic parameters of new spatters combining with the weld bead width.
对不同焊接区域的新飞溅特征参数进行统计，计算新飞溅特征参数在不同区域下特征值的总和、平均值和基于不同阈值下的百分比，结合焊缝宽度分析新飞溅特征参数变化规律。 - According to the characteristic of images gathered by charge coupled device ( CCD), the method of image processing that is high effective in eliminating the noise of spatters and welding arc light is studied in the article.
针对电荷耦合器（CCD）所获取焊缝图像的特点，研究了相应的图像处理方法，有效地消除了焊接过程中的飞溅和弧光对焊缝图像的干扰。 - Experimental results showed that the high-power disk laser welding stability could be evaluated by using the support vector machine to classify the characteristics of plume and spatters.
试验结果表明，通过支持向量机对金属蒸汽及飞溅进行特征分类可有效判断大功率盘型激光焊接质量。 - The purpose of this study was to develop statistical linear and nonlinear regression models based on the amount of spatters, meanwhile which can been an effective index implying arc welding quality.
基于这种现象，本文在波形特征分析的基础上采用了能够预测飞溅量的多元线性和非线性回归统计模型，并以飞溅量的多少为指标定量评价弧焊品质。