tensile

英 [ˈtensaɪl]

美 [ˈtensl]

adj.  张力的; 拉力的; 抗张的; 可拉长的; 能伸长的; 可延展的

CET6TOEFLGREIELTSTEM8机械

BNC.24180 / COCA.24946

牛津词典

adj.

• 张力的；拉力的；抗张的
  used to describe the extent to which sth can stretch without breaking
  1. the tensile strength of rope
     绳索的抗拉强度
• 可拉长的；能伸长的；可延展的
  that can be drawn out or stretched
  1. tensile cable
     可伸延的电缆

柯林斯词典

• ADJ 可伸展的;可拉长的
  You usetensilewhen you are talking about the amount of stress that materials such as wire, rope, and concrete can take without breaking; a technical term in engineering.
  1. Certain materials can be manufactured with a high tensile strength.
     有些材料可以制造成抗拉强度大的产品。

英英释义

adj

• capable of being shaped or bent or drawn out
  1. ductile copper
  2. malleable metals such as gold
  3. they soaked the leather to made it pliable
  4. pliant molten glass
  5. made of highly tensile steel alloy
  Synonym:ductilemalleablepliableplianttractile
• of or relating to tension
  1. tensile stress
  2. tensile pull

双语例句

• Second, the anti-impact and the tensile strength are high;
  二是抗冲击和抗拉强度高；
• The anisotropy coefficients of the uniaxial compressive strength and tensile strength of numerical simulation results are0.72 and0.24, respectively.
  数值模拟结果得出单轴抗压强度和抗拉强度的各向异性系数分别为0.72和0.24；
• Its thermal deformation behavior, hardness and tensile strength were determined.
  对其耐热形变性能以及硬度和拉伸强度进行了研究。
• Tensile testing, fracture analysis, microstructure analysis, hardness test were carried out on the welded joint.
  对焊接接头进行了拉伸强度测试、断口分析、金相组织分析、显微硬度分析。
• All parts are machined from top grade, high tensile aluminium.
  所有零件都是用顶级高强度铝加工而成。
• The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.
  研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。
• Tensile strength was tested, and the joint fractures and microstructures were analyzed.
  测试接头拉伸强度，并对断口和接头显微组织进行分析。
• This wool possesses high resilience and tensile strength.
  这种毛弹性大，拉力强。
• The product properties such as tensile strength and electric conductivity effected by cooling strength and deformation were studied.
  论述了正火（雾冷和强风冷却）和回火温度对凸轮轴中显微组织和力学性能的影响。
• Certain materials can be manufactured with a high tensile strength.
  有些材料可以制造成抗拉强度大的产品。